Jual: ICOM IC-A200 ( Air Band)
Specifications
General
Frequency range 118.000 - 136.975 MHz

Channel spacing

( according to version)

8.33/ 25 kHz auto selection

or 25 kHz only
Mode 6K00A3E ( AM)
No. of memory Ch. 20
Antenna connector SO-239 ( 50© )

Power supply requirement

( negative ground)

13.75 V DC or 27.5 V DC

automatic selection

Current drain ( at 13.75 V DC)
Transmitting
Receiving

5.0A max.
4.0A ( at AF max.)

0.5A ( at stand-by)
Operating temperature range

-30° C to + 60° C;

-22° F to + 140° F
Frequency stability ± 5 ppm ( -30° C to + 60° C)

Dimensions

( projections not incl.)

150( W) × 50( H) × 180( D) mm

529/ 32( W) × 131/ 32( H) × 73/ 32( D) in
Weight ( approx.) 1.5 kg; 3 lb 5 oz
Transmitter
Output power 36 W typ. pep ( 9 W typ. for CW)
Modulation limiting 70 - 100% ( IC-A110)
Modulation compression

Linear 85%

Max. 95%
AF harmonic distortion Less than 10% ( at max. mod.)
Hum and Noise ratio More than 40 dB
Spurious emissions Less than -16 dBm
Adjacent Ch. power*

Less than 60 dB ( 25 kHz)

Less than 50 dB ( 8.33 kHz)
Microphone connector 8-pin modulator ( 600© )
Receiver
Receiving system Double conversion superheterodyne
Intermediate freq.

1st 38.85 MHz

2nd 450 kHz
Sensitivity ( pd) Less than 1 µ V ( at 6 dB S/ N)

Squelch sensitivity

( pd; at threshold)
Less than 0.3 µ V

Selectivity

25 kHz Ch. Spacing

8.33 kHz Ch. Spacing

More than ± 8 kHz ( at -6 dB)

Less than ± 17 kHz ( at -40 dB)

Less than ± 25 kHz ( at -60 dB)

More than ± 2.778 kHz ( at -6 dB)

Less than ± 7.37 kHz ( at -60 dB)
Spurious response More than 74 dBµ
Intermodulation rejection ratio* More than 64 dB
BIocking/ desensitisation* More than 70 dB
Cross modulation rejection* More than 70 dB

Audio output power

Internal speaker

External Speaker

Headeset ( side tone)

( at 13.75 V; 10% dist.; 60% mod.)

1.5 W typical w/ 8© load

More than 10.0 W w/ 8© load

More than 0.1 W w/ 500© load
AF output impedance
EXT SP
Headset ( side tone)

8©
500©

* These specification items are not available for the IC-A110 due to approval test speciflcations.
Applicable U.S. Military Specifications

Icom makes rugged products that meet MIL-STD requirements and strict environmental standards as follows:
Standard MIL 810C MIL 810D MIL 810E
Method Procedure Method Procedure Method Procedure
Low Pressure 500.1 I 500.2 I, II 500.3 I, II
High Temp. 501.1 I 501.2 I, II 501.3 I, II
Low Temp. 502.1 I 502.2 I, II 502.3 I, II
Temp. Shock 503.1 I 503.2 I 503.3 I
Solar Radiation 505.1 I 505.2 I 505.3 I
Rain 506.1 I, II 506.2 I, II 506.3 I, II
Humidity 507.1 I, II 507.2 II, III 507.3 II, III
Salt Fog 509.1 I 509.2 I 509.3 I
Dust 510.1 I 510.2 I 510.3 I
Vibration 514.2 VIII, X 514.3 I 514.4 I
Shock 516.2 I, II, V 516.3 I, IV 516.4 I, IV

Measurements made in accordance with RTCA D0-186a ( Class C/ E, Class 4/ 6) or EN 300 676. All stated specifications are and subject to change without notice or obligation.

Type approval for the IC-A110 varies between countries. Ask your dealer for details.
Supplied Accessories

* Hand microphone, HM-161
* DC power cable
* Mounting bracket kit
* Microphone hanger kit
* Fuses

Negara Asal:	Jepang
Harga:	NEGO
Cara Pembayaran:	Transfer Bank (T/T)
Kemas & Pengiriman:	Dos